Kamis, 27 Desember 2012


INSTALLING DRIVER CANON IP1880 IN UBUNTU 12.04
In the end of year I got two weeks holidays. I spent it to install canon ip1880 in ubuntu 12.04, I have updated ubuntu 12.04 in my pc, there is is an error that the cnijfilter-common 2.70.1 can not be upgraded. So I can't print with it. I need couples of days to solve it. 
Firstly I surf thorough Google with my mobilephone, I get a website

http://ubuntuportal.com/2011/12/how-to-install-canon-printer-driver-for-linux-ubuntu.html

next I find in the comments. There is another tutorial how to install my printer canon ip1880. Here is the steps :
sudo add-apt-repository ppa:michael-gruz/canon-trunk
sudo apt-get update

Finishing the update I check it  in software sources, It is already in it .


 next I install the driver canon ip1880

sudo apt-get install canonip1880

Waiting 10 minutes it finishes. I insert usb printer cable into front usb port, press thw printer power button, configuring the printer.

Finally I can print my document with canon ip1880


Minggu, 23 Desember 2012


-->
DESIGNING TABLE OF CONTENT
IN LIBREOFFICE

The easiest way to design Table of Content (Daftar Isi) is by using some steps below :
  1. Determine the page size by click Format – Page – Page
  2. Type Format A4
  3. Width 21.00 cm
  4. Height 29.70
  5. Orientation : Portrait
  6. Left 4.00 cm
  7. Right 3.00 cm
  8. Top 3.00 cm
  9. Bottom 3.00 cm
  10. click apply - OK
  1. Format – Paragraph – Tab
  2. In the Position box type 13.00 cm or 13.50 cm
  3. In the Type Click Right
  4. In the Fill character click ….....
  5. OK

Next step you can type table of content easily
  1. Type TABLE OF CONTENT – click center icon (Control + E )
  2. Type COVER – press Tab on your keyboard – type “ i “
  3. Type ABSTRACT – press Tab on your keyboard – type “ ii “
  4. Type TABLE OF CONTENT – press tab on your keyboar – type “ iii”
  5. Type FIGURE LIST – press Tab on your keyboard – type “ iv “
  6. Type CHAPTER I INTRODUCTION – press Tab on your keyboard – type “ 1 “
  7. Type BACKGROUND – press Tab on your keyboard – type “1 “
  8. Type IDENTIFICATION – PRESS Tab on your keyboard – type “ 2 “

Now you can design TABLE OF CONTENT easily.

Here is the result